Steam tap for Delonghi coffee machine Stilosa EC230 EC260 7313285799

The original Delonghi regulator, identified by the code 7313285799, is a steam control valve specifically designed to repair the coffee machines listed at the bottom of the page (compatibility list). Essential for the proper functioning of the milk frother, this part manages the opening and closing of the steam necessary for frothing milk or dispensing hot water for tea and infusions. If you notice leaks or difficulties in closing the steam, replacing this valve is the recommended solution.

Details and Technical Specifications
- Original Delonghi spare part
- Country of production: Made in China
- Material: plastic
- Color: black
- Main function: dispensing steam and hot water
- Codes on the component: B2
- Equivalent or replaced codes: 7313278849, 7313277939

Product Dimensions and Measurements
- Total length 65mm
- Outer diameter of the hose connector 7mm

What is the Steam Valve used for?
In manual espresso coffee machines, the steam outlet valve acts as a tap that diverts pressure from the boiler to the external spout (pannarello). By turning the knob, an internal shaft retracts or advances, allowing pressurized steam to escape. It is a precision component subject to wear as it must handle high temperatures and steam pressure.

Fault Symptoms - Q&A
QUESTION: No steam or hot water is coming from the coffee machine, why?
ANSWER: If the entire system heats correctly and turning the valve knob does not produce anything, the problem may be caused by limescale buildup or a faulty valve. Before replacing it, try performing a thorough cleaning using the original DeLonghi descaler, which is available in our shop.

QUESTION: How can I dispense hot water instead of steam?
ANSWER: There is usually an option to dispense steam; selecting it causes the coffee machine to heat more than necessary and turns the water into steam. If you keep the selector in the heating position to make coffee and turn the knob to dispense steam, you will see hot water ready for preparing tea and infusions.

Installation Instructions
Installing this spare part requires a fair amount of manual skill. Before starting, ensure that the machine is turned off, unplugged, and completely cool to avoid burns. Remove the movable parts (cover, tank, drip tray, etc.), the outer cover, and the steam knob. The upper cover is held in place by two screws located near the tank and two screws near the housing of the arm. Once the upper cap is removed, you will immediately see the valve connected to the boiler; simply remove the clip holding it in place and take it out.

Need anything else?
In addition to the valve, we have hundreds of original Delonghi accessories and spare parts available in our catalog. If you cannot find what you need through self-navigation, you can contact us at any time, and we will respond promptly, even during holidays and weekends. And if a product is not available, we will do everything we can to find it and order it exclusively for you. You can find much more with us beyond spare parts for Delonghi coffee machines!

Compatibility (is it suitable for my product?)
This valve has been tested for use on the following Delonghi coffee machine models. Always check the identification label of your appliance to ensure you choose the right part for your model. If you are unsure, ask our support:

Stilosa
EC230.BK
EC230.W
EC235.BK
EC235.CR
EC235J-BK
EC235J-W
EC255.GR
EC260.BK
EC260.CR
EC260.GR
EC260.W
EC260BK
EC265C

EC250.B
EC250.W
EC251.B
EC251.W
EC270
EC271.B