Floor brush for Rowenta X-Force Flex 16.60 RH9C3 RH9C7 vacuum cleaner

The actual collection of dust, crumbs, and hair takes place in the area closest to the floor: an efficient floor brush is therefore essential to make the most of the electric broom's power. The Rowenta motorized head, code SS-2230003876, with a nominal power supply of 25.9V and a power of 30W, drives the roller to lift dirt from surfaces and make it easier to vacuum. This complete electric nozzle is suitable for replacing a vacuum cleaner brush with a damaged motor, roller, lights, or structure. Compatible models are listed at the end of the description.

Details and technical specifications
- Original Rowenta spare part
- MPN (Manufacturer Part Number): SS-2230003876
- EAN code: 3221616160200
- Country of manufacture: Made in China
- Material: plastic and metal
- Color: black
- Compatible series (check the models under compatibility): X-Force Flex 16.60
- What's included: vacuum brush with wheels, roller, connector, and lights
- Operating voltage: 25.9V
- Equivalent power consumption: 30W
- Lighting: present
- Data printed on the component: Vision Detect, MODEL: SS-2230003536, REF: SS-2230003786/LZ0

Dimensions manually verified by the PG Service team
- Head width: 253mm
- Maximum length: 310mm
- Maximum height: 63mm

What is it for?
In an electric broom, the floor brush directs dirt toward the suction channel and keeps the nozzle at the correct distance from the surface. In motorized heads, a small motor rotates the roller to loosen dust, hair, and fur that suction alone may not completely remove. Front lights (if present) also help make dirt under furniture, beds, and sofas more visible.

Symptoms: what problems can a faulty brush cause?
- Does the floor brush roller not spin or stop after a few seconds? The problem may be due to an obstruction, the head motor, or the internal transmission; first check that the roller can rotate freely without wrapped debris.
- Do both the roller and the LED lights remain off? When power does not reach the electric nozzle, the cause may be the connection, the contacts, the hose wiring, or the brush's internal electronics.
- Does the electric broom vacuum but leave hair, crumbs, or visible dirt on the floor? A worn, jammed, or hair-covered rotating brush can reduce collection even when the main motor continues to vacuum normally.
- Does the head make loud noises, vibrate, or become difficult to push? Check for foreign objects in the roller, hair around the axles, and blocked wheels, as these accumulations can make the movement irregular.

Care and maintenance of the spare part
Regular maintenance takes only a few minutes and can prevent the brush motor from overloading. Periodically remove the roller and clean the side housings, where hair and fibers tend to accumulate. The wheels must rotate freely, and the joint must not show abnormal resistance, deformation, or excessive movement. Clean the housing and the LED window with a soft, slightly damp cloth, keeping electrical contacts and motorized parts dry. If the roller remains jammed even after cleaning, stop using it to prevent the blockage from damaging the head's motor, transmission, or circuits.

Mounting instructions
- Press the release system and separate the head from the hose without pulling or twisting the contacts.
- Before mounting the new turbo brush, check that the connection is free of compacted dust, debris, or bent contacts.
- Connect the motorized brush respecting the orientation of the connection and push it gently until the lock clicks into position.
- Once mounted, perform a brief test on a clear surface, checking rotation, lighting, and joint stability.

Tips from the PG Service professionals
- To protect the turbo brush, avoid vacuuming cords, long wires, rigid fragments, or objects that could block the roller. Even with the anti-tangle system, regularly check the ends of the roller: hair and fur can accumulate near the axles, increasing the motor's strain. For quick cleaning, turn off the electric broom, remove the battery, and carefully extract hair and wires without cutting the bristles, rubber parts, or supports. Do not immerse the complete electric brush in water or spray detergents on the contacts, motor, or LEDs. Impacts against baseboards, drops, a blocked roller, and prolonged use with wrapped debris are among the most common causes of head failure.

Is it not exactly the item you are looking for?
In addition to the replacement vacuum brush, we have thousands of original Rowenta accessories and spare parts available in our shop. If you cannot find what you need using the search function, you can contact us anytime; we will respond within a few hours, including on holidays and weekends. And if a product is not available, we will do everything we can to find it and order it especially for you. We offer much more than Rowenta electric broom spare parts!

Compatibility (is it right for my product?)
This suction group is tested for use with the following Rowenta electric broom models. To ensure you purchase the right spare part, always check the label on your appliance. If you have any doubts, contact us:

Compatible with Rowenta

X-Force Flex 16.60
RH9C36
RH9C71
RH9CD9
RH9C36EV/41A
RH9C71E0/41A
RH9CD9E0/41A

Compatible with Tefal

X-Force Flex 16.60
TY9CD9
TY9CD9E0/41A
TY9CD9M0/41A