1000W heating element for Ariete MetalGrill 3in1 1934 grill - AS00006588

The heat reaching the cooking plates is produced by a dedicated heating element installed inside the grill. The Ariete electric heating element, code AS00006588, operates at 220-240 V with a rated power of 900-1000 W and is suitable for use with the MetalGrill 3in1 1934 series. The heating element heats the metal plate, allowing food to be grilled and toasted. It is a particularly important spare part when one of the grill surfaces no longer heats up due to a broken element. Compatible models are listed at the bottom of the page.

Features and technical data
- Original Ariete spare part
- MPN (Manufacturer Part Number): AS00006588
- Country of manufacture: Made in China
- Material: metal
- Colour: brown
- Compatible series (check the models under compatibility): MetalGrill 3in1 1934
- Power consumption: 900-1000 W
- Operating voltage: 220-240 V
- Position: Top or bottom, it is interchangeable.

Measurements manually checked by the PG Service team
- Width 192.5mm
- Length 132mm
- Thickness 7mm
- Distance between spade terminals 16.5mm
- Spade terminals 4.8mm

What is it used for?
In a grill or electric griddle, the heating element is responsible for converting electrical current into heat energy. Powered at 220-240 V, the 900-1000 W element heats up and gradually transfers heat to the cooking plate. The thermostat and safety devices then regulate or cut off the power to the heating element and must be distinguished from the heating element itself. Usually, a grill has at least 2 electric heating elements.

Symptoms, what problems can you solve by replacing the heating element
Does one of the two plates of the grill remain completely cold while the other heats up? If the power supply and thermostat are correct, check the continuity of the element associated with the cold plate using a multimeter.
Does the plate only heat up intermittently? The expansion caused by heat can make a loose contact on the terminals or an internal break in the heating element evident. Also check the thermostat and wiring before replacing the spare part.
Does the grill trip the electrical protection when it starts to heat up? A ground fault in the heating element can be a possible cause and requires an insulation check. Do not perform any further tests if there are signs of burning or leakage.
Do both plates not heat up and the grill seems to be powered? Before replacing the heating element, check the thermostat, thermal fuse, switches and wiring, because a common component can cut off the power to both plates.

Care and maintenance of the spare part
The internal heating element does not require direct cleaning by the user. Useful maintenance consists mainly in keeping the removable non-stick plates clean and preventing grease and liquids from reaching the electrical parts. Before cleaning, always disconnect the grill from the mains and let it cool down. If during a repair the heating element shows deformations, significant oxidation on the terminals or signs of overheating, check that the problem was not caused by deteriorated electrical contacts. Do not immerse or wash the electric heating element and do not use detergents on the electrical connections.

Installation instructions
- Before starting, remove the plug and work exclusively with the grill completely cooled down.
- Reach the element installed in the top or bottom position, avoiding forcing hinges, wiring and supports.
- Photograph the electrical connections before disconnecting the old element.
- Compare the AS00006588 spare part with the removed component: 220-240 V power supply, 900-1000 W power and dimensions. Check that the shape, fittings and connections match before installation.
- Position the new heating element in the provided supports, avoiding unnecessary pressure or twisting.
- Before putting the grill back into service, check the insulation, surface heating and correct operation of the control devices. As it is a component powered directly from the mains, replacement is recommended for competent personnel.

Advice from the PG Service assistance centre
- Before replacing the heating element, measure the continuity of the element with a multimeter and also check the thermostat, thermal protections and connections. The spare part must match the specified characteristics:, 900-1000 W and dimensions. To preserve the heating system, keep the removable plates and the grease collection tray clean, preventing liquids, grease or detergents from penetrating inside the grill. Wash exclusively the parts indicated as removable and washable, after separating them from the appliance. The most common causes of heating element failure are thermal wear, loose or oxidised connections, leaks and deterioration of the element over time.

Is it not exactly the item you are looking for?
In addition to the replacement heating coil, we have many original Ariete accessories and spare parts available in our shop. If you cannot find what you need through the search, you can contact us at any time, and we will respond within a few hours, even on holidays and weekends. And if an item is not available, we will do everything we can to find it and order it especially for you. We have much more than just spare parts for Ariete grills!

Compatibility (is it suitable for my product?)
This heating element is verified for use on the following Ariete grill models. Carefully check the label of your appliance to avoid compatibility problems. In case of uncertainty, contact us:

MetalGrill 3in1 1934/00
00C193400ARAS
00C193400AR0