Askoll M318 220V 10W Condensate Pump for Hisense Gorenje Panasonic Dryer

Replacement condenser pump for the drain circuit of compatible tumble dryers. The tumble dryer pump, code PMP011GO, corresponds to the references Type M318, Art. RR0374 RR037403, Cod. 492057. The component pumps the condensate from the collection sump to the destination intended by the machine. It can be used as an equivalent for references ANH-269743, 492057, 269743, etc. (see the complete list at the end of the page), after checking compatibility with the specific model.

Technical specifications
- Adaptable SKL spare part
- MPN (Manufacturer Part Number): PMP011GO
- Country of production: Made in Romania
- Material: plastic and metal
- Color: black
- Data printed on the spare part: Askoll Type M318, Art. RR0374 RR037403, Cod. 492057
- Operating voltage: 220-240V AC
- Frequency: 50Hz
- Power consumption: 900mA 10W
- Class: 155
- Other data reported: S3 Ton=1' Toff=2'
- Connection type: 2 male 6.3mm spade connectors
- Alternative or replaced codes: ANH-269743, 492057, 269743, etc. (see the complete list at the end of the page)

Dimensions personally checked by the PG Service team
- Total length 80mm
- Total width 60mm
- Total height 71mm
- Outer tube diameter 10mm ~ 12mm
- Body dimensions 45x64.5x46.5mm

What is its function?
The condenser pump in a tumble dryer is used to remove the water that accumulates in the condensation circuit during the operation of the appliance. When the condensate level requires emptying, the electric pump sucks the water through its own inlet and pushes it into the delivery tube. An efficient tumble dryer drain pump allows for regular drainage of condensate during the different drying cycles.

Symptoms, what problems can a faulty pump cause?
- Does the tumble dryer report a full tank even when it has been emptied? The condenser pump may not be correctly transferring the water from the sump to the collection container.
- Does water accumulate at the bottom of the tumble dryer? The accumulation can be caused by the tumble dryer drain pump not working or by blocked pipes or water passages.
- Does the pump make a humming sound but the water is not drained? If the motor is powered but no drainage occurs, it is advisable to check the free rotation of the impeller and the presence of blockages in the tubes.
- Does the condenser pump not make any noise during the phase in which it should drain? The total absence of operation may depend on the pump motor, the electrical connections, or the system that controls its activation.
- Does the upper tank no longer fill up and water remains in the sump? Check the drain pump and the delivery tube, because a failure or obstruction can interrupt the transfer of condensate.
- Does the tumble dryer interrupt the cycle with an error related to water or drainage? An inefficient condenser pump can allow the water level to rise excessively and cause the control systems to intervene.
- Does the pump work noisily or intermittently? Impeller wear, residues inside the pump body, or motor deterioration can cause noise and irregular operation.
- Was the pump replaced but the water continues not to be drained? The failure to drain does not always depend on the pump: obstructions, sensors, floats, or power supply problems can produce very similar symptoms.

How to preserve the component's lifespan
To preserve the drain electric pump, it is especially important to keep the components that prevent lint and residues from reaching it clean. Regularly clean the filters, collection tray, sump, and accessible ducts according to the instructions provided for the appliance. If the pump is accessible during maintenance, check that the water inlet and the impeller area are free from foreign bodies. Avoid ignoring drainage failure errors or water accumulation, because operating under strain can accelerate the wear of the pump.

Installation instructions
- Before replacement, disconnect the power supply to the tumble dryer and make sure it cannot start accidentally.
- Access the lower area of the appliance where the sump and condenser pump are installed.
- Photograph or note the position of the electrical connections and the tubes before disconnecting the old pump.
- Disconnect the connectors and the tubes, then free the pump from its respective fixings.
- Check and clean the sump, pipes, and pump seat before installing the new component.
- Position the electric pump in its respective seat, fix it correctly, and reconnect the tubes and connectors as originally.
- After reassembly, check that the tubes are well connected and free of kinks or bottlenecks.

Tips from the professionals at PG Service
- Before replacing the condenser pump, we recommend checking and thoroughly cleaning the collection sump and the connected ducts. Lint, fluff, and residues can indeed partially block the drain circuit and reduce the efficiency of the tumble dryer pump. To extend its lifespan, periodically perform maintenance on the condenser circuit to prevent accumulations of lint around the impeller and in the tubes. The most common causes of failure are an impeller blocked by residues, prolonged operation under strain, motor wear, and leaks. Before ordering the spare part, it is also useful to check the references present on the original component.

Do you need anything else?
In addition to the replacement drain pump, we have hundreds of original accessories and spare parts available in our catalog. If you cannot find what you need through the search, you can contact us anytime, we will respond within a few hours even during holidays and weekends. And if an item is not available, we will do everything possible to find it and order it especially for you. You can find much more with us besides tumble dryer spare parts!

Compatibility (is it suitable for my product?)
This electric pump is certified for use on the following tumble dryer models. Do you have doubts about the right spare part for your model? Check the label of your appliance or write to us: we will respond within a few hours.

Compatible with ATAG 492057
Compatible with Beko C00908143
Compatible with Candy 40012912
Compatible with Gorenje 492057
Compatible with Hanyu B13-6C
Compatible with HiSense 269743, 859507, 875382
Compatible with KÜPPERSBUSCH 440697
Compatible with Panasonic ANH-269743, ANH-492057, ANH-859507
Compatible with SMEG 792970216